Ohaus JR Series Electronic Balances - Manual (Page 21)

21
To view or change the Auto-Zero setting:
1. Access the Auto-0 submenu to dis-
play the current setting.
2. Press to change the setting.
Press to accept the displayed
setting.
When is released, Auto-0 will
be displayed again and the User menu
will be returned.
End End End End End
You must use END to exit the User menu.
Changes you make in the User menu
Changes you make in the User menu Changes you make in the User menu Changes you make in the User menu Changes you make in the User menu
are only stored in memory if you use
are only stored in memory if you use are only stored in memory if you use are only stored in memory if you use are only stored in memory if you use
END.
END. END. END. END.
To exit the User menu and store your
settings, press when End is dis-
played.
When is released, the balance will
be returned to normal weighing opera-
tions.
ON ON ON ON ON
TARE TARE TARE TARE TARE
AUTO ZERO AUTO ZERO AUTO ZERO AUTO ZERO AUTO ZERO
OFF turns Auto-Zero OFF
.5d
.5d .5d .5d .5d sets threshold to .5 divisions sets threshold to .5 divisions sets threshold to .5 divisions sets threshold to .5 divisions sets threshold to .5 divisions
1d sets threshold to 1 division
3d sets threshold to 3 divisions
ON ON ON ON ON
TARE TARE TARE TARE TARE
OFF OFF OFF OFF OFF
MODE MODE MODE MODE MODE
ON ON ON ON ON
TARE TARE TARE TARE TARE
ON ON ON ON ON
TARE TARE TARE TARE TARE