Setup menu, Setup menu protection – Ohaus JR Series Electronic Balances User Manual

Page 22

To access the Setup menu, press and

hold

until SETUP is displayed, then

release it.

SETUP MENU

The Setup menu enables you to retain program balance parameters once they have
been set. Access to the Setup menu can be disabled using the Lock Out switch. The
following table shows the sequence in which submenus appear on the Setup menu.

SETUP MENU TABLE

Setup Menu Protection

The Setup menu may be locked-out to prevent unauthorized personnel from changing
settings. To lock out the Setup menu, refer to the section titled Menu Lock-Out
Protection.

NOTE

NOTE: If -SAFE- is displayed, the Setup menu has been locked out. Settings may be
viewed but not changed. See the Menu Lock-Out Protection section to enable it for
making changes.

To access a submenu:

Repeatedly press

until the de-

sired submenu is displayed.

Press

to select the displayed

submenu.

TARE

NOTE

NOTE: You must use END to store any
changes you make to the Setup menu.

The following sections describe each
item on the Setup menu in detail.

TARE

OFF

MODE

Enables the selection of weighing

units.

Indicates the software version of the

balance.

Enables individual or all menus to be

locked out.

Used to exit the Setup menu and

store your selections.