Ohaus JR Series Electronic Balances - Manual (Page 16)

16
End End End End End
If you have entered the Calibration menu
and do not wish to calibrate the balance,
use END to return to normal weighing
operations.
Repeately press until End is dis-
played.
Press , when released, the balance
will returned to normal weighing opera-
tions.
6. Press . The display will show
-C- momentarily, then C followed by
the next weight to be placed on the
pan. Do not disturb the balance when
-C- is displayed. Disturbances will
result in improper calibration.
7. Place the required weight on the pan,
then press . The display will
show -C- while the balance recali-
brates. When the weight on the pan is
displayed along with the current indi-
cator, the balance is recalibrated.
ON ON ON ON ON
TARE TARE TARE TARE TARE
ON ON ON ON ON
TARE TARE TARE TARE TARE
ON ON ON ON ON
TARE TARE TARE TARE TARE
OFF OFF OFF OFF OFF
MODE MODE MODE MODE MODE