High Lifter Lift Kit for Can-Am Maverick 1000 (2013) - Signature Series - Manual (Page 8)

8
Rear Installation Sway Bar Bracket and Lift Brackets
1) Place jack under the center of rear and lift until the weight is off the suspension. Be careful to secure the
properly so it is stable on the jack.
2) Remove the rear wheels.
3) In order to attach the sway bar brackets you will need to disconnect the top of both shocks from the frame.
This will allow the rear control arms to move freely.
4) Disconnect the sway bar linkage from the sway bar and the upper control arm.
5) Save the stock bolt and nut that connects the linkage to the upper sway bar. You will reuse this to reconnect
the new brackets to the control arm.