High Lifter Crushlok Wheels 12” & 14” Installation - Manual

High Lifter Products, Inc. (318) 524-2270
780 Professional Dr. N Fax (318) 524-2297
Shreveport, LA 71105
Crushlok Wheels 12” & 14” Assembly Instructions
Parts Diagram
Disclaimer:
The High Lifter Crushlok wheels are intended for competitive mud racing in mud and water filled pits and not
for trail riding. They are designed to minimize resistance to forward progress by presenting a very narrow
profile and to reduce buoyancy by narrowing the carcass of the tire and weighing approximately 2 times that of
other stock or aftermarket wheels. Accordingly, these wheels are not recommended for trail riding or
recreational riding and are without warranty of any kind.
Note: There is an optional install kit (12C-LOK-KIT) that can be purchased with these wheels. Illustrations
and photos in these instructions are performed using the install kit. Also, flange style lug nuts are required
when using these wheels. Use factory torque specifications when installing these wheels.
The wheels are available in both 12” and 14” sizes and each size is drilled in 4 bolt patterns, 4/110, 4/115, 4/137
and 4/156. Due to center locator tabs on Polaris and some other models of ATV hubs, either 1” spacers or
alteration of hubs is required. Some models with these locator tabs can be adjusted for with the addition of
washers but this depends on the stud length in the hub.
Warranty:
These wheels are designed and constructed for competition mud racing. As such there is no guarantee or
warranty of any kind furnished with them.
1