High Lifter Lift Kit for Can-Am Maverick 1000 (2013) - Signature Series - Manual (Page 6)

6
9) Connect the lower part of the bracket to the frame. You will only use two of the three holes in the frame.
Insert two 3/8” x 1” bolts through the bracket and frame then fasten it tight with a 3/8” lock nut.
10) Now place 10mm lock nuts on the 10x70mm bolts and fasten tight. Fasten tight the ¼” lock nut on the ¼”
bolt.
11) Insert a 10x70mm bolt through the bracket and place the Small spacer on the bolt. Insert the shock eyelet
between the spacer/bolt and the bracket. Once the shock is in place, push the bolt through and fasten with a
10mm lock nut.