High Lifter Lift Kit for Polaris 800 RANGER RZR “S” and “4” - Signature Series - Manual (Page 8)

8
12) Now connect the top of the shock to the brackets.
13) Insert 3ea 10mm flat washers between the shock eyelet and the large lift bracket. Insert a 10x65mm
hex bolt through the plates, washers and shock.
14) Fasten it tight with a 10mm lock nut.
NOTE: If you are running Dual Exhaust you may need to rotate your shock reservoir to the inside toward
the frame.
15) Place plastic back onto the UTV.
16) Place wheels back on the UTV torque all lugs to factory specifications.