EVS IPDirector Version 5.6 - May 2009 Part 2 User's Manual - Manual (Page 88)

IPDirector Version 5.6 – User Manual – Part 2: Logging
EVS Broadcast Equipment – May 2009
Issue 5.6.D
77
2.5.2 H
OW TO
(U
N
)
ASSIGN A
K
EYWORD
U
SING THE
K
EYWORD
N
UMBER
When you work with the Keyword Grid tool, you can assign keywords using the
keyword numbers associated with each keyword of the grid. They allow a fast
selection of the keyword.
To assign a keyword to a log or clip using the keyword number, proceed as
follows:
1. Open the relevant keyword grid and select View > Keyword Numbers to
view the numbers associated to each keyword.
2. Open the Create/Edit Log, Create/Edit Playlist or New/Edit Clip window of
the media in IPDirector.
The Apply button should become active (orange) in the keyword grid.
3. Click again in the keyword grid (the keyword grid window must be active
instead of the other window).
4. On the keyword numeric pad, do one of the following:
• To add a keyword to the media, type the keyword number corresponding
to the requested keyword and press ‘+’.
The keyword is added to the “Create” or “Edit” window.
• To remove a keyword from the media, type the keyword number
corresponding to the requested keyword and press ‘-’.
The keyword is removed from the “Create” or “Edit” window.
5. To remove a keyword, click it again in the keyword grid or dictionary.
It is removed from the media window.