EVS IPDirector Version 5.6 - May 2009 Part 2 User's Manual - Manual (Page 52)

IPDirector Version 5.6 – User Manual – Part 2: Logging
EVS Broadcast Equipment – May 2009
Issue 5.6.D
41
1.8 ENTERING A T/C OFFSET
Imagine the logs and the recordings are made in different locations or on two
different setups with a T/C offset between the two. For example, the images are
recorded live at the event while the logger works in a studio, with IP Logger on his
laptop. The log entries carry the PC time code of the laptop and the recordings
have the actual live time code.
When the clips are associated to the log sheet, the time codes of the clips and the
logs won't match and you need to enter an offset. This T/C offset will be applied
when:
• importing a log sheet on a setup or
• importing all the media related to a log sheet.
Note
The T/C Offset is available only when:
• the log sheet is not locked
• the user has the appropriate rights to modify the log sheet
• there are log entries in the log sheet
H
OW TO
D
EFINE A
T/C O
FFSET
To change the T/C offset, proceed as follows:
1. Click File > T/C Offset
The following window will appear:
2. Enter a value in one of the T/C fields and press ENTER.
3. The field is validated and the other T/C values are recalculated.
When you fill in two of the three T/C fields, the third one is automatically
calculated.
If all three values are filled in, when the offset is changed, the T/C in the
clip is re-calculated.
4. Click OK to confirm or CANCEL to discard changes.