EVS IPDirector Version 5.6 - May 2009 Part 2 User's Manual - Manual (Page 37)

Issue 5.6.D IPDirector Version 5.6 – User Manual – Part 2 – Logging
EVS Broadcast Equipment – May 2009
26
1.4.3 C
OMFORTABLE
L
OGGING
With IP Logger, you have the possibility to log actions on media which has been
recorded previously and then rewind in the record train. To do so, you first need to
assign a player channel to the IP Logger window.
As soon as the player channel is associated, a running timecode appears in the
Player area, below the Player New button.
H
OW TO
A
SSIGN A
P
LAYER
C
HANNEL TO
IP L
OGGER
If a default player channel is defined in IPDirector, it will directly be assigned to
the IP Logger when you open the application.
Otherwise, you have two options to assign the playback channel for use in IP
Logger:
From the Channel Explorer
1. Open the Channel Explorer.
2. In the Channel Explorer, select the player channel to assign to the log
sheet.
3. Drag the player channel to the log sheet into the bar at the bottom of the IP
Logger.
The channel name will then appear in green in this area.
Additionally, the player area will become active and show the timecode of the
selected channel in green. If the channel is in an E/E mode, it will be the same as
the LIVE area timecode.