EVS IPDirector Version 5.6 - May 2009 Part 2 User's Manual - Manual (Page 12)

IPDirector Version 5.6 – User Manual – Part 2: Logging
EVS Broadcast Equipment – May 2009
Issue 5.6.D
1
1. IP Logger
1.1 INTRODUCTION
IP Logger is used to create a log which relates events with:
• time codes
• camera angles
• clip numbers
• metadata
in a fast and efficient way. IP Logger does not interfere with, but compliments a
live production, while also producing invaluable data for use of the material during
or after the event.
Once the live event is over, the log can be refined as necessary because IP
Logger can be used to add events to a log at any time on any recorded media
declared relevant. It will associate any clips then found on the XNet network with
the log.
A previously recorded feed can be reviewed and a log post-produced, as the clip
association data is updated whenever a new event is recorded in an active log.
Note
The IPLogger module is a software option, which requires the licence key
20 being imported to XSecure.
For more information on the required licence key, contact the Support or
Sales team.
1.2 USER INTERFACE
1.2.1 O
PENING OF
IP L
OGGER
To open IP Logger, select the corresponding icon on the main
IPDirector toolbar. The IP Logger window will open.