EVS XT3 Version 11.02 - July 2013 Configuration Manual - Manual (Page 78)

Available Configurations with SLSM 3-Phase Cameras
IN4/OUT1 IN3/OUT2 IN2/OUT3 IN1/OUT4
#REC
SLSM
3x
#
REC
#PLAY
Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link Sec.
Link
1 0 0 REC1,3 REC1,2 REC1,1
1 1 0 REC2 REC1,3 REC1,2 REC1,1
1 0 1 PLAY1 MIX1 REC1,3 REC1,2 REC1,1
XREC configurations
1 3 1 PLAY1 MIX1 REC1,3 REC4 REC1,2 REC3 REC1,1 REC2
2 0 1 PLAY1 MIX1 REC1,3 REC2,3 REC1,2 REC2,2 REC1,1 REC2,1
1 1 1 PLAY1 MIX1 REC1,2 REC2 REC1,1 REC1,3
1 1 2 PLAY1 MIX1 PLAY2 MIX2 REC1,2 REC2 REC1,1 REC1,3
Example: 1xSLSM 3PH + 3REC+ 1PLAY (XREC)
The BNC connectors to be used as record and play channels in an SLSM configuration
with 1xSLSM 3PH + 3REC + 1PLAY in XREC mode need to be cabled as shown below:
Available U-Motion 6-Phase Configurations
The table below shows the available U-Motion 6 Phase configurations in HD with an XT3
4U server, and how the BNC connectors should be cabled:
IN4/OUT1 IN3/OUT2 IN2/OUT3 IN1/OUT4
#REC
SLSM
6x
#REC #PLAY
Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link Sec.
Link
1 0 1 PLAY1 MIX1 REC
1,3 REC
1,6 REC
1,2 REC
1,5 REC
1,1 REC
1,4
70 3. Multicam Configuration
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013