EVS XT3 Version 11.02 - July 2013 Configuration Manual - Manual (Page 31)

In the Server-Based Application
To assign a server facility name in the server-based application, proceed as follows:
1. In the Multicam Setup window, press F to call the Assign server facility name
command. A dialog box opens:
2. Type the server facility name and press ENTER.
The facility name is directly assigned and displayed in the Title bar, as well as on the
OSD.
In the Web-Based Interface
To assign a server facility name in the web-based interface, proceed as follows:
1. From the Multicam Setup window, click Assign server facility name in the Tools
menu. A dialog box opens:
2. Type the server facility name and press OK.
The facility name is directly assigned and displayed in the Title bar, as well as on the
OSD.
2.3.3. Activating and Deactivating the Password
Protection
Activating the Password on the EVS Server
Introduction
The administrator can protect the EVS server with a password. This password protection
prevents unauthorized users from changing configuration settings. It does not prevent
from using operational commands.
The password protection can only be activated and deactivated from the server-based
application.
CONFIGURATION MANUAL XT3 Server 11.02
2. Multicam Setup 23