EVS XT3 Version 11.02 - July 2013 Configuration Manual - Manual (Page 241)

Glossary
G
GPI
Abbreviation for General Purpose Interface. This refers to a device used as an
communication interface with the EVS server. It has digital lines which may be used for
input, output, or both, depending on the function.
H
Hypermotion camera
These are cameras that record at a frame rate much higher than real time. The content
recorded at high frame rate on a memory block of the camera buffer is ingested into the
EVS server through a single record channel when the operator initiates a play command
on the camera. Hypermotion cameras can be controlled by an LSM Remote Panel.
I
Intra-frame codec
Codec type for which the compression techniques are performed relative to information
contained within the current frame, and not relative to any other frame in the video
sequence. It is shortened by 'intra' in the manual.This is opposed to long-GOP codecs.
(Source Wikipedia)
L
Logical channel
Logical player or recorder channel in a given configuration, independent from the physical
connections that have to be used to enable this logical channel.
M
Mix on One Channel
Feature that allows using the secondary link of the codec module of a player channel on
the V3X board (J3) as the preview channel to provide the PGM/PRV mode with a single
codec module.
Multicam Configuration window
Window in the server-based and web-based Multicam Setup application from where you
can define all configuration parameters.
Multicam Setup application
Term used to refer equally to the server-based or web-based user interface used to set up
and configure the EVS servers
CONFIGURATION MANUAL XT3 Server 11.02
Glossary 233