EVS nanoAir Version 1.0 - April 2013 - Manual (Page 80)

Issue 1.00.B nanoAir – Version 1.00 – User Manual
EVS Broadcast Equipment – April 2013
74
5.4.5 Element speed
This function is similar with that in Playlist Edit Pane, see section 5.3.4 for more details.
5.4.6 Ejecting a Playlist
The function of eject command is to clear the playlist from the Playout Pane, and then
the playout channel is idle.
To eject a playlist, two methods are available:

Press the Eject button from the Transport Function Bar.

Use the keyboard shortcut: E
Warning
The EJECT command is not active when the playlist is on air.
To eject the playing playlist, user has to stop it and try again.
5.4.7 Goto IN/OUT of the Current Clip
The Goto function re-loads the clip on its first frame of the selected clip.
Three methods are available to go to the IN/OUT point of the current clip:

Double-click the element (for GOTO IN point only).

Select the clip in playout list, click to go to IN point, or click to go to OUT
point.

Select the clip in the playout list and use the keyboard shortcut: I or O
If the playlist is in PLAY or PAUSE mode, the playlist jumps to the IN/OUT point of the
selected element but remains paused.
5.4.8 Recuing a Playlist
The Recue function re-loads the playlist on the first frame of the first clip.
Two methods are available to recue a playlist:

Double-click the first element of the playlist in the Playlist pane

Use the Recue button from the Transport Function Bar
Note
See section 5.6.2 for the shortcuts to recue the playlist loaded on PGM.