EVS nanoAir Version 1.0 - April 2013 - Manual (Page 11)

nanoAir – Version 1.00 – User Manual
EVS Broadcast Equipment – April 2013
Issue 1.00.A
5
2.3 Installing nanoAir
Before installing nanoAir, you need to configure EVS serial number on your PC, if your
PC has been licensed, you can skip configure EVS serial number part. After configuration,
you can preceed installing .NET framework and then installing nanoAir application.
To configure EVS serial number, proceed as follows:
1. Run nanoAir installation package and then follow the steps of the Setup wizard.
2. If the computer you are operating is an EVS computer, click Yes and go to the next
step.
Enter the EVS serial number which is at the back of the computer.
And then click Finish.