EVS nanoAir Version 1.0 - April 2013 - Manual (Page 68)

Issue 1.00.B nanoAir – Version 1.00 – User Manual
EVS Broadcast Equipment – April 2013
62
5.3.4 Element Speed
The speed of clip in the playlist can be changed with the range during 0%~300%, and
then the clip of the playlist will be played out with the desirable speed.
To change the clip ’s speed, proceed as follows:
1. Click the speed area of the clip in the loaded playlist.
2. Input the exact number which is from 0% to 300%, and then click other areas or just
press ENTER to validate this change.
To set normal speed by 100%, proceed as follows:
1. Select the speed area of the clip you want to change.
2. Two methods are available to set the normal speed:
a) Input 100% into the speed area.
b) Click the Speed Button on the left side of the speed area
3. The clip ’s speed goes back to normal (100%)
Note
The default speed of a clip is always 100%.