EVS nanoAir Version 1.0 - April 2013 - Manual (Page 47)

nanoAir – Version 1.00 – User Manual
EVS Broadcast Equipment – April 2013
Issue 1.00.A
41
Audio Level
This area displays the audio level in a graphical format.
For example:
2 audios 4 audios 8audios 16audios
Current Timecode
This area displays the current timecode according to the current Primary TC of clip or
train. The format is hh:mm:ss:ff(.)
Clip Name/Recorder Name
If clip is loaded, this area displays the clip name.
If recorder train is loaded, this area displays the recorder name.
5.1.3 Creating a New Clip
To create a new clip, proceed as follows:
1. Load a train. 4 recorder channels are available for trains loading by default.
You can select one channel by clicking on it to load the
corresponding trains.
2. Input name, IN, OUT, or click to clear the corresponding values.
3. Click New Clip to create a new clip named test : the new clip appears in the Clip
Library.