EVS nanoAir Version 1.0 - April 2013 - Manual (Page 48)

Issue 1.00.B nanoAir – Version 1.00 – User Manual
EVS Broadcast Equipment – April 2013
42
5.1.4 Updating clip
Modifying clip means that MarkIn/ MarkOut point and Clipname can be modified
To modify clip data, proceed as follows:
1. Load an existing clip from Library Pane.
2. Modify clip name and /or IN or Out point.
Note
The clip can only be shorten because the current version does not handle Cli
guardbands
3. Click Update Clip to modify the existing clip.
5.1.5 Browse the Content
Using the Shuttle Bar
After loading A/V content, drag the shuttle bar to move the bullet of the Shuttle Bar for
the existing clip or recorded trains, after that, A/V content stays at PAUSE mode.
Typing value into Server TC field
To change the position in the existing clip or recorded trains, you can type a TC value into
the Server TC field and then press ENTER from the keyboard, and then the bullet of the
Shuttle Bar can be changed correspondingly.