EVS XT2 Version 11.01 - November 2012 Configuration Manual - Manual (Page 56)

Concurrent Modifications in the Remote Panel and the
Server-Based Application
When a parameter is modified with the Remote Panel, and that parameter is not in conflict
with the parameter modified in the Configuration page of the server-based application, the
following message will be displayed on the VGA.
'The configuration has been modified by another user without
any conflict. Your copy has been updated with these
modifications.'
When a parameter is modified with the Remote Panel, and the parameter is in conflict with
the parameter modified in the Configuration page of the server-based application, the
following message shall be displayed on the VGA or on the LCD display of the Remote
Panel. The configuration shall be updated if the user agrees.
'The configuration has been modified by another user.
Do you want to load it and lose your modification?'
Warning
When this message is displayed on the Remote Panel and the user answers 'No'
to the message (Clear button), the modifications performed on the Remote
Panel will be preserved. The changes applied on the VGA will however be loaded
after the user leaves the operational setup menu, except if the specific fields
modified on the VGA have been modified and validated on the Remote Panel
after the message display.
3.1.2. Overview of the Multicam Configuration
Window
Introduction
In the server-based and web-based interfaces, all server settings related to each
configuration file are grouped in a single window: the Multicam Configuration window.
When the server is not running a given configuration, the Multicam Configuration window
allows you to define any of the configurations available in the Multicam Setup window.
When the server is running a given configuration, the Multicam Configuration window
allows you to modify the settings of the running configuration.
The Multicam Configuration window is organized in a similar way in both user interfaces:
• It consists of seven tabs.
• Each tab contains one or more pages in the server-based application.
• Each tab displays all settings on a single page in the web-based interface.
• The settings on page/tab are organized in field groups having a dedicated name.
XT2 Server - Version 11.01 - Configuration Manual
3. Multicam Configuration 46