EVS XT2 Version 11.01 - November 2012 Configuration Manual - Manual (Page 204)

Push Receive Page
Description Specifies the page of your machine where clips sent to you by
other network operators using the PUSH function must be
stored.
See section "Navigating and Editing in the Multicam
Configuration Window" on page 49 for more information on
how to enable pages
Values Page 1 to 10 (=0). Several pages can be selected.
Default Values (Page) 5
3.9.10. Audio Settings
Introduction
These fields are available in the following interfaces:
• in the Multicam Configuration window, Operation tab, in the basic display mode:
◦ on page 3 on the server-based application.
◦ on page 1 on the web-based interface.
• in the Operational setup menu of the Remote Control Panel (8.1).
The following screenshot presents page 3 of the Operation tab in the server-based
application, where the Audio settings are available, and highlights the Audio settings area:
XT2 Server - Version 11.01 - Configuration Manual
3. Multicam Configuration 194