EVS XT2 Version 11.01 - November 2012 Configuration Manual - Manual (Page 196)

Mono per group
Description Defines how many audio mono channels are associated to
each of both audio tracks of a timeline.
Values The following values are possible, depending on the value
defined for the Number of tracks setting in the Channels tab:
# tracks Possible values
4 2
8 4 (default) , 2+6, 6+2
16 8
Note
The 2+6 feature is particularly useful when working in Dolby audio to assign a
timeline track to the stereo pair and the other track to the Dolby 5.1 audio
3.9.7. Protection Settings
Introduction
The Protection settings aim at protecting clips stored on the EVS server from deletion.
These fields are available in the following interfaces:
• in the Multicam Configuration window, Operation tab, in the basic display mode:
◦ on page 3 on the server-based application.
◦ on page 1 on the web-based interface.
• in the Operational setup menu of the Remote Control Panel (5.1).
XT2 Server - Version 11.01 - Configuration Manual
3. Multicam Configuration 186