EVS XT2 Version 11.01 - November 2012 Configuration Manual - Manual (Page 140)

Type
Description Defines the privileges of the EVS server on the SDTI network.
Values The following values are possible:
• Client: It cannot access the content on other EVS servers.
• Master: It can access all content on other EVS servers.
• Server: It manages the SDTI network, and it can access
all content on other EVS servers.
One EVS server on the network should be set to Server
type. If no Server type is defined, XNet will not be
activated. If more than one EVS server is defined as
Server type, only the first one to connect will be the actual
Server.
Whatever the server type defined, the content of an EVS
server can be accessed without restrictions by the other EVS
servers (with type Master or Server) on the SDTI network.
Default Values Server
High Priority
Description Defines a higher priority for a play channel of the local server
whenever they play network clips/trains. This higher priority
will only apply in play, not in shuttle mode.
Values Yes / No (default)
Note
Using this command will not prevent a freeze on the SDTI network if the network
is completely stalled. It is always worth checking the network status and
defining clear network usage rules if you wish to play footage across the
network.
XT2 Server - Version 11.01 - Configuration Manual
3. Multicam Configuration 130