AASTRA DT390 for MX-ONE User Guide EN - Manual (Page 17)

C ORDLESS P HONE FOR MX-ONE™
17 1424-EN/LZT 103 087 Uen F2 2012-03-02
3.2 Display Information
The icons and text in the display indicate functions and settings available
to the user. The display gives visual feedback on all actions performed,
and also textual warnings, see figure 2 on page 17. The owner ID can be
set manually by the user.
Note: If a name is available it is displayed together with, or instead of,
the number.
Figure 2: Example of a display in idle mode
Status bar The top row (Status bar) is used for icons giving the
user information about signal strength, missed call,
time and battery status. This row is always visible.
Header bar The second row (Header bar) displays the current
date, headset connection, system connection, phone
lock, and so on.
Active area The next rows (Active area) are used for information
such as the name of the system to which the cordless
phone is connected. A user identity provided from the
system, or an owner ID, can also be displayed if it has
been configured in the Settings tab. This is also the
area for popup text, missed calls or to confirm an
action.
Soft key bar The bottom row (Soft key bar) is used for soft keys.
There are three soft keys located just beneath the
display. The function of each soft key is indicated by
text in the display just above the key, see figure 3 on
page 18. The functions defined for the soft keys cannot
be changed.
4
Menu
11:00
01/11/2009
223344
System A
Status bar
Header bar
Active area
Soft key bar