beautypg.com

AASTRA 4220 Lite for BusinessPhone User Guide EN User Manual

Page 93

background image

93

BusinessPhone – Dialog 4220 Lite / Dialog 3210

Glossary

Extension

All telephones connected to the PBX have a

unique internal number (up to 8 digits).

Function code

A digit code that corresponds to a specific

function.

Hold

To put a call on hold.

See section

During Calls

” on page 27.

Information

Internal callers are informed about absence

and time of return. External callers are diverted

to the operator, where the same information is

available. Information can be of two kinds:
1. Pre-programmed text information.

2. Voice information.

Intercom Line

A two-way direct call function between two

extensions, for instance an executive-secretary

communication.

See section

Other Useful Features

” on

page 71.

Intrusion

To intrude on an ongoing call when a requested

extension is busy.

See section

Outgoing Calls

” on page 17.

IP call

Internal call sent via an internal data network

(LAN or WAN).

ISDN

Integrated Services Digital Network. Provides

your system with supplementary services from

the public net.

Least Cost Routing

A function that automatically selects the

cheapest way to connect your external call (not

necessarily the shortest distance). See section

Least Cost Routing

” on page 79.

Loudspeaker Paging

All members of an extension group are paged,

i.e. receive a short, sharp tone on the

loudspeaker followed by a Voice message from

the sender.

See section “

Group Features

” on page 65.

Mailbox

The Mailbox system controls the messages

that are left for or sent by you when you are

absent. See section “

Messages

” on page 49.

Message

A message can be sent to any extension. This

is useful when you receive the busy tone or get

no answer. There are two kinds of message:
1. Call Me message.

2. Voice message.
See section “

Messages

” on page 49.

Mute

To switch the microphone temporarily off. See

section “

During Calls

” on page 27.

Night Switching

Used for directing all incoming calls to one

extension (answering position), for example

when the office is closed.

See section “

Other Useful Features

” on

page 71.

Password

A four-digit code needed to e.g. block your

extension and retrieve messages from the

Mailbox system. You can set your own

Password.

See section “

Security

” on page 62.

PBX

Private Branch Exchange. Your telephone

switching system (e.g. BusinessPhone 250).

Pre-defined text

Pre-programmed absent information. See

section “

Absence Information

” on page 42.