Outgoing calls, Make calls – AASTRA DT4x2 for MX-ONE User Guide EN User Manual
Page 37
37
DT412/DT422/DT432
Outgoing Calls
Outgoing Calls
Make calls
You can also make a call via the Phonebook, see section
On-hook
е ж
Enter the phone number and press.
The number is shown in the display. Your phone will go off-hook
and establish the connection. The number is stored in the Call list.
The number may be any of the following:
•
an extension number,
•
an external number, where 0 is the digit for external call access.
Notes:
Correct a wrong entry by pressing
C
(see display). If you
decide not to make the call while keying in the number,
press
C
(see display) to stop.
It is possible to turn on/off the tone sender in a predialed
number by making a long press on the
*
key (e.g. when
calling telephone banks). Tone sender on will be indicated
with a
T
in the number, and off with
-
. If a pause is required
in the number, it is added by making a long press on the
#
key. The pause is indicated with a
P
in the number.
You can make your calls faster by programming Soft/Hot
keys with frequently used numbers. See section
a Hot key or a Soft key with a phone number
.
If you receive a queue tone when the digit or digits to get an
external line are dialed (if the feature Least Cost Routing is
used in the system), keep waiting. Once a line becomes free
you will receive a dial tone. If a warning tone is heard, the
selected line is marked “Expensive”.