Parallel ringing, 21* å – AASTRA DT4x2 for MX-ONE User Guide EN User Manual

Page 35

DT412/DT422/DT432

Incoming Calls

Parallel Ringing

The Parallel Ringing function makes it possible for an incoming call

to ring several phones simultaneously and for the call to be

answered on any of the phones. The main advantage of this

function is that you do not risk losing any calls.
The function requires all the phones involved to be defined in a

Parallel Ringing list, which must be configured and initiated by

your system administrator. Because only calls to a main extension

will be distributed among the phones in the list, this main extension

also needs to be defined.
A call to a specific extension will not be distributed to other phones

in the list, and will only ring that specific extension's phone.
Parallell Ringing can be temporarily disabled by the phone user

using the function “Internal Follow-me”. See also section “

To disable Parallel Ringing temporarily

*21* å #

Dial, enter the extension number and press.

Note: U.K., dial

Number

Press.

Wait for the call icon to stop flashing.

Press to finish the procedure.

If you want to disable Parallel Ringing for all phones defined in the

list, follow the procedure for disabling the function from the phone

with the main extension number and enter the number of the

answering position.
If you want to disable Parallel Ringing for one specific phone in the

list only, follow the procedure for disabling the function from this

phone and enter its extension number.