System a, No system, No access – AASTRA DT4x2 for MX-ONE User Guide EN User Manual
Page 18
Description
DT412/DT422/DT432
18
System connection messages
System A
System indication
The phone is in contact with System A. It is also possible for the
system to be named something else, e.g. MD110.
No system
Out of coverage
The phone is not in contact with any system. Please ask your
system administrator to log on the phone.
Note: When re-entering the coverage area it can take a
couple of minutes before the phone automatically has
registered into the system.
It is also possible to get an out of coverage warning signal,
contact your system administrator if you require this.
No access
Access indication
Your phone has contact with a system, calling is not allowed.
Display icons
Call / Off-hook
Appears when your phone is off-hook and flashes during ringing.
Audio signal off
Shown when all alert signals, including ring signal, message tone,
key beep etc. are turned off. High priority messages will however
override this setting. See section “
Battery
Always shown in the display in idle mode. When the level is low it is
time to charge the battery. See section “
Loudspeaking (handsfree)
Shown when the loudspeaker is activated and the phone is in
Loudspeaking operation (handsfree). See section “
New message
Appears when a new message is received. The number on the
right side of the icon shows the total number of unread messages.
The symbol will remain until the message is marked as read. See
section “
Note: For voice messages the New message icon is only
an indication of received voice messages, the number does
not reflect the actual number of unread messages.
3