AASTRA DT4x2 for MX-ONE User Guide EN - Manual (Page 103)

103 DT412/DT422/DT432
Settings
Program a Hot key or a Soft key with a function
When you have entered Settings: г б
Select Soft key or Hot key. â
or
ã
Select key.
For the Soft keys you can select keys Left, Middle or Right and for
the Hot keys you can select keys 0 to 9. á
Press.
Edit
Press (see display).
Name: is displayed. å
Save
Enter the name and press (see display).
Changes saved is displayed. How to write text, see section “ Enter
names and numbers ” on page 51. ã
Press.
Function: is marked.
Change
Press (see display). â
or
ã
Select the required function.
See section “ Available functions ” on page 101.
Select
Press (see display).
The following prerequisites apply:
Data send - Enter data if you want to predefine it, or leave it out if
you want to enter data after pressing the Soft key.
Data with prefix - Enter prefix.
Short-cut - Assign the short cut.
SMS - When SMS address is shown you can leave it blank, or you
can predefine a destination address. You can also predefine the
SMS text.
Change mode - Mark the mode that should be changed to.
Not used - Not used will be indicated in the Soft key list.
Save
or
Select
Press to save the setting (see display).
The key is programmed and the name of the selected function is
shown.
Repeat the procedure to program a new key or edit a
programmed key.