AASTRA 600d for OpenCom 1000 User Guide (with bookmarks) EN - Manual (Page 62)

56
Acknowledging paging messages
Paging messages can be sent to your phone if your communication system is equipped with the
appropriate application. Paging messages are shown on your handset’s display and – depending on
the system setting – can also be signalled with a ringer and/or vibra call alarm. The red LED conti-
nues to flash.
To acknowledge that you have received a paging message, confirm with Ok.
If you receive a paging message during a call, you will either hear a short signal tone or vibra call will
be activated (in the case of alarm paging). You can temporarily hide the paging message with Esc; it
will however the signalled to you again later until such time as you acknowledge it.
Paging messages will be displayed on your handset’s display even if you have activated a call diver-
sion.
Calls for members of an ACD group
Members of an ACD group (ACD= Automatic Call Distribution) can be reached under a shared call
number. With incoming calls the communication system searches for a phone that is free within the
group. The ACD function is comparable with the “user group” function; it does however provide
more features, such as call statistics and follow-up work times. If you are a member of an ACD group,
you can also receive ACD calls with your handset. The functions required to do so are available in the
special features menu (see page 75).
Telephoning