Dell OptiPlex GX240 - Manual (Page 93)

E x p a n s i o n C a r d 93
CAUTION: Some network cards automatically start the computer
when they are connected. To guard against electrical shock, be
sure to unplug the computer from its electrical outlet before
installing any expansion cards.
1 Prepare the expansion card for installation.
See the documentation that came with the expansion card for
information on configuring the card, making internal connections, or
otherwise customizing it for your computer.
2 Follow the procedures, in reverse order, for your particular computer in
"
Removing an Expansion Card ."
3 Place the expansion card on the connector and press down firmly.
Make sure that the card is fully seated in the slot.
If the expansion card is full-length, insert the end of the card into the
expansion-card guide bracket as you lower the card toward its
connector on the system board. Insert the card firmly into the
expansion-card connector on the system board.