Dell OptiPlex GX240 - Manual (Page 30)

30 B a d g e
www
.dell.com | support.dell.com
Removing the Badge
Small Form-Factor Computer
1 Open the computer cover.
2 Using a flat-blade screwdriver, release the tabs from the inside of the
computer and remove the plastic computer cover from the metal
component.
C o m p u t e r C o v e r R e m o v a l
3 Remove the accent door by pressing the middle of the door while
lifting away the sides of the door.
4 From inside the front bezel, push in on the two tabs on either side of
the badge to release the badge.
5 Press on the badge until it is freed.
1 Tabs (2 on each side)
1