Dell OptiPlex GX240 - Manual (Page 102)

102 E x p a n s i o n - C a r d C a g e ( S m a l l D e s k t o p C o m p u t e r O n l y )
www
.dell.com | support.dell.com
Removing the Expansion-Card Cage
CAUTION: Use a wrist grounding strap as explained in
" Precautionary Measures ."
1 Examine any cables connected to expansion cards through the back-
panel openings, and disconnect any cables that will not reach the
expansion-card cage once it is removed from the computer.
2 Remove any cables connected to the expansion card.
3 Gently pull on the handle and lift the expansion-card cage up and
away from the computer.
E x p a n s i o n - C a r d C a g e R e m o v a l
Replacing the Expansion-Card Cage
1 Align the slots in the side of the expansion-card cage with the tabs on
the side of the computer, and slide the expansion-card cage down into
place.
2 Make sure that the riser board is fully seated in the RISER connector
on the system board.