Dell OptiPlex GX240 - Manual (Page 142)

142 S y s t e m B o a r d
www
.dell.com | support.dell.com
R e m o v i n g t h e S y s t e m B o a r d
5 Place the system board that you just removed next to the replacement
system board.
Replacing the System Board
1 Transfer components from the existing system board to the
replacement system board.
2 Remove the memory modules and install them on the replacement
board.
CAUTION: The microprocessor package and heat sink assembly
can get hot. To avoid burns, be sure that the package and
assembly have had sufficient time to cool before you touch them.
3 Remove the heat sink assembly and microprocessor from the existing
system board and transfer them to the replacement system board.
4 Configure the settings of the replacement system board.