Bosch PFS 105 E WALLPaint - Manual (Page 14)

14 | English
1 619 929 K18 | (18.11.11) Bosch Power Tools
plugs with earthed (grounded) power tools. Unmodified
plugs and matching outlets will reduce the risk of electric
shock.
f Protect the machine from rain and moisture. The pene-
tration of water in a power tool increases the risk of electric
shock.
f Do not misuse the cord. Never use the cord for carry-
ing, pulling or unplugging the power tool. Keep cord
away from heat, oil, sharp edges and moving parts.
Damaged or entangled cords increase the risk of electric
shock.
f When operating a power tool outdoors, use an exten-
sion cord suitable for outdoor use. Use of a cord suitable
for outdoor use reduces the risk of electric shock.
f When operating the power tool in damp/moist environ-
ments is unavoidable, use a residual current device
(RCD). Use of a residual current device reduces the risk of
electric shock.
Personal safety
f
Use safety equipment. Always wear eye protection.
Safety equipment such as dusk mask, non-skid safety
shoes, hard hat, or hearing protection used for appropri-
ate conditions will reduce personal injuries.
Use and care of the power tool
f
Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
f Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
f Use the power tool, accessories and application tools
etc. in accordance with these instructions, taking into
account the working conditions and the work to be per-
formed. Use of power tools for operations different from
those intended could result in a hazardous situation.
Service
f
Have your power tool serviced by a qualified repair per-
son using only identical replacement parts. This will en-
sure that the safety of the power tool is maintained.
Safety Warnings for Fine-spray Systems
f Use only paints/coatings as specified under Intended
Use. Paints/coatings that are not approved (e.g., varnish,
oil-based paint, etc.) can damage the fine-spray system.
f Do not direct the fine-spray system against yourself,
other persons or animals.
f Observe possible hazards of the paint/coating. Ob-
serve the manufacturer’s working instructions for the
paints/coatings. The manufacturer’s instructions must be
followed in order to reduce the risk of injury.
f Keep the plug of the mains cord and the trigger switch
of the spray gun clear of paint and other fluids. Never
hold the cord by its connectors to support it. Failure to
follow the instruction can lead to electric shock.
f Use only water-based materials for cleaning. Volatile
solvents create an explosive environment and can damage
the fine-spray system.
f Supervise children. This will ensure that children do not
play with the fine-spray system.
f Children or persons that owing to their physical, senso-
ry or mental limitations or to their lack of experience or
knowledge, are not capable of securely operating the
fine-spray system, may only use this fine-spray system
under supervision or after having been instructed by a
responsible person. Otherwise, there is danger of operat-
ing errors and injuries.
Products sold in GB only: Your product is fitted with an
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The power tool is intended only for spraying water-based dis-
persion wall paint in enclosed locations.
Use the machine only when you can fully assess all functions
and handle them without limitation, or after having received
appropriate instructions.
Product Features
The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1 Spray gun
2 Adjusting lever for the spray-jet width
(compact jet/wide jet)
3 Air cap
4 Adjusting ring for spray jet
(horizontal/vertical)
5 Union nut
6 Mark for SDS connection
7 Thumbwheel for spraying capacity
OBJ_BUCH-1543-001.book Page 14 Friday, November 18, 2011 9:16 AM