Garmin GPSMAP 376C - Manual (Page 49)

5. When using a map loaded to a data card, you can view
detailed information about an individual map, highlight the
Map Name, and press ENTER. Highlight OK, and press
ENTER to exit the Map Information Page.
6. To select/deselect individual maps (data card maps only) to
show on the Map Page, highlight the box next to the map you
want, and press ENTER to check/uncheck the Show box.
OR
Press MENU, select one of the options (Show All, Hide All,
or Show Defaults), and press ENTER.
7. Press QUIT to exit the Map Information page.
Map Orientation
There are three map orientation options: North Up orients the map
like a paper map. Track Up orients the map in the direction of travel.
Course Up orients the map so the direction of navigation is always
up. When using Track Up or Course Up, the North arrow indicates
the orientation. To change the map orientation, press MENU to open
the Map Page. Press MENU again. Select Set Up Map, and press
ENTER. See page 40 for information.
Zooming In and Out of the Map
The map display has 28 available map zoom ranges ranging from
20 ft to 800 nm (20 ft to 800 mi or 5 m to 1200 km). The map zoom
range is controlled by the IN and OUT keys, with the current scale
shown at the bottom right of the data window.
NOTE: The scale value represents the distance from one end of
the scale bar ( ) to the other.
To select a map scale (zoom in and out):
Press the OUT key to zoom out, press the IN key to zoom in.
The GPSMAP 376C has a built-in worldwide database, with more
detailed coverage available through the use of the BlueChart,
BlueChart g2 or MapSource data. The GPSMAP 376C shows
cartography as long as chart information is available for the zoom
scale you selected.
GPSMAP 376C Owner’s Manual 1
M
ArIne
M
ode
P
Ages
> M
AP
P
Age