Sonar tab – Garmin GPSMAP 376C User Manual
Page 83
Setting Up DSC
Use the Setup sub tab to turn DSC on and off. If you have more than
one chartplotter and only want DSC to show on another chartplotter,
turn DSC off on this unit.
This Setup sub tab also allows you to simulate Distress Calls and
Position Reports while the unit is in Simulator Mode, see
.
Simulating calls is helpful for practice before connecting to the real
system. The Distress Call simulator also helps to check if alarms are
working properly.
DSC Setup
Sonar Tab
Use the Sonar tab to set up and configure sonar. See the
for more
information about Sonar setup options.
NOTE: You must have a GSD 20 or 21 Sounder Module
connected to your GPSMAP 376C to use sonar.
Main Menu—Sonar Tab
GPSMAP 376C Owner’s Manual
7
M
AIn
M
enu
>
s
onAr
t
Ab