Garmin GPSMAP 376C User Manual

Page 31

To edit the route on the map:

1. Highlight the

Route tab on the Main Menu.

2. Select a route, and press

ENTER. Press MENU to open the

Route Review Page options menu.

3. Highlight

Edit on Map, and press ENTER.

4. Select a location on the route (the route turns red when the

arrow is over the route), and press

ENTER.

5. Use the

ROCKER to drag the route to the new point location,

and press

ENTER.

Editing the route on the map

6. Repeat steps 4 through 5 until all points are added to the

route. Press

QUIT when finished.

You can enter information about your trip so the GPSMAP 376C can

estimate information about your trip.

To plan your route:

1. Open the Route Review Page options menu.
2. Highlight

Plan Route, and press ENTER.

Entering Speed and Fuel Flow for trip planning

3. Enter the data for Speed and Fuel Flow. You can also enter

the date and time of your departure. Press

QUIT to return to

the Route Review Page.

NOTE: Fuel flow rates are measured in “units per hour.” System

setting changes for units of measure (statute, nautical or metric)

do not affect the fuel flow measure. You should enter fuel

flow rates based on information for your vehicle (such as the

operator’s manual or performance specifications), and make note

of the units of measure (gallons or liters).

GPSMAP 376C Owner’s Manual

ArIne

ode

reAtIng

And

sIng

outes