Projecting a waypoint – Garmin GPSMAP 496 User Manual
Page 84
a
ut
o
M
ot
Ive
6
GPSMAP 496 Owner's Manual
A
utoMotIve
M
ode
P
Ages
And
f
eAtures
>
e
dItIng
And
M
AnAgIng
W
AyPoInts
Projecting a Waypoint
You can also create a new waypoint by “projecting” the distance and
bearing from a specific location to a new location.
To create a new waypoint by projecting its location:
1. Create a waypoint using your favorite method (discussed
in previous sections). The new waypoint is created with the
next available waypoint number and the receiver’s last known
location as the default location.
2. Press
MENU twice to open the Main Menu.
3. Highlight
Points from the vertical list of tabs using the
ROCKER.
4. Press
MENU to open the New Waypoint Page options menu.
5. Highlight
Project Location, and press ENTER.
Project Location Menu
Enter the distance, bearing, and location from which to project.
6. To change the location from which you are projecting the new
waypoint, highlight the
From field, and press ENTER. The
Find Menu opens.
Select the point from which you want to project your new
waypoint just as you would select a waypoint or point of
interest. For more information see the
section on
.
7. To adjust the distance that the new waypoint is projected
beyond the original waypoint, highlight the
Distance field
and press
ENTER. Enter the projection distance and press
ENTER.
To adjust the bearing that the new waypoint is projected from
the original waypoint, highlight the
Bearing field and press
ENTER. Enter the bearing, and press ENTER.
8. When you have adjusted all elements of the projected
location, highlight
Save, and press ENTER.
9. Make any other changes to the new waypoint data (such as
the name or symbol), highlight
OK, and press ENTER.