beautypg.com

Radiator cap, Engine coolant, 2010 zdx – Acura 2010 ZDX User Manual

Page 553

background image

1. Make sure the engine and radiator

are cool.

2. Relieve any pressure in the cooling

system by turning the radiator cap
counterclockwise, without
pressing down.

3. Remove the radiator cap by

pushing down and turning
counterclockwise.

4. The coolant level should be up to

the base of the filler neck. Add
coolant if it is low.

Pour the coolant slowly and
carefully so you do not spill any.
Clean up any spill immediately; it
could damage components in the
engine compartment.

5. Put the radiator cap back on, and

tighten it fully.

RADIATOR CAP

CONTINUED

Engine Coolant

549

Maintenance

2010 ZDX

This manual is related to the following products: