Acura 2010 ZDX - Manual (Page 117)

Keyless Start Guidance Screens
On models with keyless access system
When this item is set to ON, you will
see some guidance messages on the
multi-information display. You can
change this setting between on and
off. For more information on start
guidance messages, see page
197 .
You can choose this item to
customize from
‘‘METER SETUP’’ by
pressing the INFO ( ▲/▼) button
repeatedly.
Press the SEL/RESET button to see
the selections.
Select ON or OFF by pressing the
INFO (
▲/▼) button, then enter
your selection by pressing the SEL/
RESET button.
When your selection is successfully
completed, the display changes as
shown above, and then goes back to
the customize item screen.
If the ‘‘SETTING INCOMPLETE’’
message appears, go back to
‘‘KEYLESS START GUIDANCE
SCREENS ’’ and repeat the procedure
again.
CONTINUED
Multi-Information Display
113
Instruments
and
Controls
2010 ZDX