Multi-information display, 2010 zdx – Acura 2010 ZDX User Manual
Page 104
Customize Settings
You can customize some of the
vehicle control settings to your
preference. Here are the settings you
can customize:
●
ADAPTIVE CRUISE CONTROL
(ACC) SETUP
ꭧ1
●
METER SETUP
●
POSITION SETUP
●
KEYLESS ACCESS SETUP
ꭧ2
●
LIGHTING SETUP
●
DOOR/WINDOW SETUP
ꭧ1: On models with adaptive
cruise control (ACC)
ꭧ2: On models with keyless
access system
When you want to change the
vehicle control settings, press the
INFO (
▲/▼) button to select CHG
SETTING, then press the SEL/
RESET button.
Each time you press the INFO
(
▲/▼) button, the screen changes
as shown on the next page. Press the
INFO (
▲/▼) button, until you see
the setup you want to customize,
then press the SEL/RESET button to
enter your selection.
If you do not make any changes,
select EXIT, the display returns to
normal.
If you want the settings as they were
when the vehicle left the factory,
select DEFAULT ALL, as described
on page
Multi-Information Display
100
2010 ZDX