Acura 2010 ZDX - Manual (Page 274)

SCAN FLD － This function samples
the first file in each folder in the
order they are stored. To activate the
folder scan feature, press and release
the SCAN side of the SCAN/A.SEL
bar repeatedly. You will see SCAN
FLD icon in the display. You will get
a 10 second sampling of the first file
in each folder. Press and hold the
SCAN side of the bar to get out of the
folder scan mode and play the last
file sampled.
You can also select the folder scan
feature from the menu items with the
selector knob (see page
268 ).
Select ‘‘NORMAL PLAY’’ to turn
either scan feature off. Pressing
either side of the CATEGORY or
SKIP bar also turns off the feature.
To Stop Playing a USB Flash
Memory Device
To change modes, press the AM/FM
or
button. Press the DISC
button to switch to the disc mode.
Press the USB/AUX button to switch
the audio mode between the USB or
Bluetooth ® audio.
You can also press the MODE button
on the steering wheel to change
modes.
If you reconnect the same USB flash
memory device, the system will
begin playing where it left off.
Disconnecting a USB Flash Memory
Device
You can disconnect the USB flash
memory device at any time even if
the USB mode is selected on the
audio system. Make sure to follow
the USB flash memory device
’s
instructions when you remove it.
USB Flash Memory Device Error
Messages
If you see an error message in the
display, see page
271 .
Playing a USB Flash Memory Device (Models without navigation system)
270
2010 ZDX