beautypg.com

Installing a child seat, 2010 zdx – Acura 2010 ZDX User Manual

Page 54

background image

4. Place the child seat on the vehicle

seat, then attach the seat to the
lower anchors according to the
child seat maker's instructions.

Some LATCH-compatible seats
have a rigid-type connector as
shown above.

Other LATCH-compatible seats
have a flexible-type connector as
shown above.

5. Whatever type you have, follow the

child seat maker's instructions for
adjusting or tightening the fit.

6. Lift the head restraint (see page

162

), then route the tether strap

through the legs of the head
restraint and over the seat-back,
making sure the strap is not
twisted.

RIGID TYPE

FLEXIBLE TYPE

TETHER STRAP

Installing a Child Seat

50

2010 ZDX

This manual is related to the following products: