ACR&Artex C406-1 - Manual (Page 62)

ACR ELECTRONICS, INC / ARTEX PRODUCTS
DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL
C406-1 (453-5002), C406-1HM (453-5003)
25-62-10
Page 62 of 90
JUL 31/12
Figure 17. Blade Antennas 110-340 and 110-341 Outlines and Dimensions
7.75
(197)
30º
15º
2.70
(69)
2.89
(73)
2.25
(57)
0.562 (14.3)
8.25
(210)
6.000
(152.4)
3.000
(76.2)
1.620 (41.2)
1.500
(38.1)
0.750 (19.1)
1.25 (32)
0.625 (15.9)
0.201 (5.1) Ø (6 PLCS)
RF CONNECTOR BNC FEMALE
Dimensions in inches (mm)
C.G.
110-340
INSTALLATION NOTES:
1. MOUNT ANTENNA USING #10-32 SS MACHINE
SCREWS AND ASSOCIATED HARDWARE.
72548( 72 “ /%,1 “ 1‡FP
2. PROVIDE 0.625 (5/8”) (16 MM) Ø HOLE
FOR BNC CONNECTOR.
3. PROVIDE 0.213 (5.4 MM) Ø HOLES (6 PLCS)
FOR ATTACHING HARDWARE.
4. BONDING THROUGH MOUNTING SCREWS
NOT REQUIRED.
5. APPLY A LAYER OF ANTI-CORROSION BONDING
GREASE BETWEEN AICRAFT AND ANTENNA BASE.
6. GASKET NOT SUPPLIED AND USE OPTIONAL.
REQUEST P/N 280-0340 IF ONE IS DESIRED.
1.160 (29.5)
3.80 EST
(97)
3.15 EST
(80)
C.G.
3.8 MAX
(97)
10.1 MAX
(257)
4.90 MAX
(125)
2.38
(61)
0.90 (23)
1.19 (30)
1.38 (35)
1.06 (27) 2.05 MAX (52)
0.200 - 0.207 Ø (6 PLCS)
(5.1 - 5.3 Ø)
RF CONNECTOR BNC FEMALE
Dimensions in inches (mm) 110-341
INSTALLATION NOTES:
1. MOUNT ANTENNA USING #10-32 SS MACHINE
SCREWS AND ASSOCIATED HARDWARE.
72548( 72 “ /%,1 “ 1‡FP
2. PROVIDE 0.625 (5/8”) (16 MM) Ø HOLE
FOR BNC CONNECTOR.
3. PROVIDE 0.213 (5.4 MM) Ø HOLES (6 PLCS)
FOR ATTACHING SCREWS.
4. THIS ANTENNA BONDED BY THE BASE PLATE
BONDING THROUGH MOUNTING SCREWS
NOT REQUIRED.
5. APPLY A LAYER OF ANTI-CORROSION
BONDING GREASE BETWEEN AICRAFT
AND ANTENNA BASE.