HONDA 2011 CR-Z - Manual (Page 74)

73
Instrument Panel
Indicators
Indicator Name On/Blinking Explanation Message
High
Temperature
Indicator
Comes on briefly when you turn •
the ignition switch to ON II .
Blinks when the engine coolant •
temperature goes up, and stays
on if the temperature continues to
rise.
Blinks while driving • - Drive slowly to
prevent overheating.
Stays on while driving
• - Immediately
stop in a safe place and allow the
engine to cool.
Overheating P.297
IMA System
Indicator
Comes on briefly when you turn •
the ignition switch to ON II .
Comes on if there is a problem •
with the IMA system.
Remains on or does not come on •
at all - Avoid high speed driving and
have the vehicle checked by a dealer
as soon as possible.
If the IMA Indicator Comes ON P.303
System Message
Indicator
Comes on along with a beep when •
a problem is detected. A system
message on the multi-information
display appears at the same time.
While the indicator is on, press the •
(information) button to see
the message again.
Refer to the Indicators information in
•
this chapter when a system message
appears on the multi-information
display. Take the appropriate action
for the message.
The multi-information display does not
•
return to the normal screen unless the
warning is canceled, or the
button is pressed.
—
31SZT600book.indb 73 2010/04/28 13:41:01
2011 CR-Z