2011 cr-z – HONDA 2011 CR-Z User Manual
Page 71
70
Instrument Panel
Indicators
Indicator
Name
On/Blinking
Explanation
Message
Seat Belt
Reminder
Indicator
Comes on and the beeper sounds
•
if you are not wearing a seat belt
when you turn the ignition switch
to ON
II
. If the passenger is not
wearing a seat belt, the indicator
comes on about six seconds later.
Blinks during driving if either you
•
or your passenger has not fastened
a seat belt. The beeper sounds
and the indicator blinks at regular
intervals.
The beeper stops and the indicator
•
goes off when you and your
passenger fasten your seat belts.
Stays on after you or your
•
passenger has fastened the seat
belt - A detection error may have
occurred in the sensor. Have the
vehicle checked by a dealer.
Low Fuel
Indicator
Comes on when the fuel reserve is
•
running low (approximately 1.8 U.S.
gal./6.9 Liter left).
Blinks if there is a problem with the
•
fuel gauge.
Comes on
•
- Refuel your vehicle as
soon as possible.
Blinks
•
- Have the vehicle checked by
a dealer.
ABS (Anti-lock
Brake System)
Indicator
Comes on for a few seconds when
•
you turn the ignition switch to ON
II
, then goes off.
If it comes at any other time, there
•
is a problem with the ABS.
Stays on constantly
•
- Have the
vehicle checked by a dealer. With
this indicator on, your vehicle still has
normal braking ability but no anti-lock
function.
31SZT600book.indb 70
2010/04/28 13:40:55
2011 CR-Z