2011 cr-z, Starting to drive – HONDA 2011 CR-Z User Manual
Page 199
198
Driving
When Driving Starting the Engine
3. Turn the ignition switch to START
without depressing the accelerator pedal.
Starting to Drive
■
Automatic transmission (CVT) model
Keeping your right foot on the brake pedal, release the parking brake. Check
1.
that the brake system indicator has gone off.
Put the shift lever in
2.
D
. Select
R
when reversing.
Gradually release the brake pedal and gently depress the accelerator pedal to
3.
pull away.
Starting the Engine
Do not hold the key in START for more than 15
seconds.
If the engine does not start right away, wait for
•
at least 10 seconds before trying again.
If the engine starts, but then immediately stops,
•
wait at least 10 seconds before repeating step 3
while gently depressing the accelerator pedal.
Release the accelerator pedal once the engine
starts.
The immobilizer system protects your vehicle from
theft. If an improperly coded key (or other device)
is used, the engine's fuel system is disabled.
31SZT600book.indb 198
2010/04/28 13:42:49
2011 CR-Z