HONDA 2012 Pilot - Manual (Page 627)

Slowly turn the extension with the
wheel nut wrench clockwise to
take up the slack of the hoist cable.
Make sure the bracket is seated in
the center hole of the flat tire.
Turn the extension with the wheel
nut wrench clockwise until the flat
tire rests against the underbody of
the vehicle and you hear the hoist
click.
Store the jack and the tools in the
tool box.
Refer to
(see page or ).
23.
24.
25.
26.
524 529
Changing a Flat Tire
Changing a Tire with
TPMS
T
a
k
ing
Ca
re
of
th
e
U
ne
x
p
e
c
te
d
619
WHEEL NUT WRENCH
Loose items can fly around the
interior in a crash and could
seriously injure the occupants.
Store the wheel, jack, and tools
securely before driving.
Always raise the spare tire hoist, even
if you are not stowing a tire. If the
hoist is lef t down, it will be damaged
during driving and need to be replaced.
11/08/01 11:11:33 31SZA630_626