HONDA 2012 Pilot - Manual (Page 596)

Push the new bulb straight into
the socket until it bottoms.
Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Turn on the lights to make sure
the new bulb is working.
Your vehicle uses halogen light
bulbs. When replacing a bulb, handle
it by its plastic case, and protect the
glass from contact with your skin or
hard objects. If you touch the glass,
clean it with denatured alcohol and a
clean cloth.
Pull down the under cover from
the bumper carefully.
Remove the five holding clips with
a flat-tip screwdriver. Pull the bulb straight out of its
socket. 1.
4.
5.
6.
2.
3.
Except LX models
Replacing a Front Fog Light Bulb
Lights
588
BULB
SOCKET
SIDE MARKER LIGHT UNDER COVER
HOLDING CLIP
Halogen bulbs get very hot when lit. Oil,
perspiration, or a scratch on the glass
can cause the bulb to overheat and
shatter.
11/08/01 11:06:48 31SZA630_595